Best Orange Peel Ceiling Service Contractors in Wellington, FL

Load the hopper gun with the drywall compound. It can get heavy; therefore, only load the amount you are feeling comfortable holding. It does not harm to fill the hopper completely. Putting less compound inside the hopper will make it easy to tip the gun while aiming at the ceiling without the compound falling. You may need somebody to hold you the hopper while loading to make your job easy.

Attach your gun to the air compressor. It attaches with the hose found behind the gun and small nuts which tighten to hold them together. If you buy the hopper gun, look at the instructions for help. If you are renting one from popcorn removal in Wellington, ask the professionals for additional instructions.

Adjust your compressor. The pressure between fifteen and forty-five psi is the advised range for orange peel ceilings, with its opening. The valve found at the back of the gun will control the air, and the dial controls openings found on the front. Additional air pressure will make a fine spray but will be hard to control. A heavy spray will end up hiding more flaws. Large openings will make large texture blobs, and small openings will make the fine textures. You can train to spray against a plastic, cardboard, or any other material to know the outcome and then adjust it to suit your taste and needs.

Apply your orange peel ceilings keeping the gun in the distance of between four feet from the ceiling during the time. If the ceiling height is tall, you may require the step ladder. Keep moving your gun in random lines or in patterns; both of which are acceptable if you are covering the ceiling evenly and consistently. It is advisable to be thin in texture than being too thick, as you can continue adding texture easier than removing it. Shaking your hopper a little while working will help keep airflow; allowing the texture to get dry.

Use a primer to paint on the texture and then with the ceiling paint after it dries. You may require two or more coats. After the paint dries, you can then eliminate the protective cloths, tape, or sheets, and put the furniture back into the room.

The items you require are drop cloths, painter’s plastic, painter’s tape, stepladder, sanding pole, primer, paint roller, paintbrush, and a paint tray. You will also need the drill, drywall compound, bucket, hopper gun, ceiling paint, and air compressor.